SSHW QB1 Stainless Steel Swing Arm Flagpole Balustrade Post | SUS304/316L Glass Railing Post, Factory Wholesale & OEM
SSHW QB1 stainless steel swing arm flagpole balustrade post in SUS304/316L satin finish for glass railings. Factory wholesale and OEM customization.
SSHW QB1 Stainless Steel Swing Arm Flagpole Balustrade Post (Glass Railing Post with Flag Bracket)
AI Summary
The SSHW QB1 swing arm flagpole balustrade post is a structural stainless steel railing post for glass balustrade systems. Made from SUS304 or SUS316L, it holds glass panels with two clamp points and carries a pivoting arm for flags, banners or signage, combining guarding and display in one component.
This flagpole post suits hotel lobbies, exhibition halls, embassies, stadiums, commercial complexes and coastal resorts. The 316L grade resists salt spray, humidity and pool chlorine, while the satin finish gives a low-glare look for modern architecture.
Why Choose the SSHW QB1 Flagpole Balustrade Post? (Core Engineering Advantages)
1. Corrosion resistance with two grades
The QB1 post is offered in SUS304 and SUS316L. SUS304 performs well indoors and in mild outdoor settings. SUS316L contains molybdenum and has lower carbon, giving better resistance to chloride pitting and weld-zone corrosion, which makes it the preferred railing post for seaside, pool and de-icing salt exposure. Duplex 2205 can be evaluated for extreme conditions.
2. Precision manufacturing
The post body is produced from stainless steel tube or profile using CNC machining and controlled welding. Glass clamps, pivot sleeves and arm connectors can be made by investment casting or CNC turning, which keeps dimensions consistent and reduces on-site adjustment. Welds are ground and polished before the final satin finish is applied.
3. Structural performance and service life
The post is anchored by a base plate, while two glass clamps and the handrail share the load in the upper section. The swing arm pivot is designed with flag wind load in mind, so repeated movement does not loosen the joint over time. Ultimate load and fatigue data are available upon request and confirmed per project.
4. Practical swing arm flagpole function
The reference drawing shows an arm projection of about 550 mm. The arm can extend outward to display a flag or fold back beside the post, so it does not obstruct circulation when unused. This is valuable for exhibitions, ceremonies, brand events and government buildings.
5. Easy installation and adjustment
Glass clamp spacing is about 600 mm, with roughly 230 mm from the lower clamp to the base. This matches common glass hole layouts, and the gasket and clamp design leaves room for fine adjustment to compensate for drilling tolerance and uneven substrates.
6. Refined surface aesthetics
The standard satin finish reduces glare and hides fingerprints, which suits hotels and premium residences. Mirror polish, PVD black and other colors are available as custom options.
Options, Finishes & Mounting Configurations
Two clamp configurations (per reference drawing)
- QB1-B04APM: larger round-disc glass clamps for a bolder decorative look.
- QB1-LT01M: slimmer stand-off style clamps for a lighter, minimalist appearance.
Material grades
| Grade | Recommended Environment | Notes |
|---|---|---|
| SUS304 | Indoor, dry inland areas | Cost-effective, needs regular cleaning |
| SUS316L | Coastal, pool, tropical | Chloride resistant, recommended for outdoor commercial use |
| Duplex 2205 | Extreme corrosion, heavy duty | Evaluated on request, confirmed per project |
Finishes
Satin or brushed (standard), mirror polish, and PVD black, champagne or bronze (custom).
Mounting
The base plate is surface mounted on concrete slabs or steel structures with chemical or mechanical anchors. Side-fix or embedded solutions can be engineered for specific site conditions.
Accessories
EPDM or nylon gaskets, A2 or A4 stainless fasteners, and a Ø50.8 mm handrail tube with connectors can be supplied together with the post.
Project Selection Checklist for Engineers and B2B Buyers
1. Corrosion environment
- Indoor bathrooms, lobbies and showrooms: SUS304 satin.
- Outdoor commercial terraces and general urban areas: SUS316L satin with routine washing.
- Coastal high-salt-spray sites, pools and locations within 1 km of the sea: SUS316L with an electropolished or finer surface, and Duplex 2205 where required.
2. Substrate and glass thickness
- The drawing references about 10 mm glass, with a typical compatible range of 8–12 mm, confirmed per project.
- Confirm glass type (tempered or laminated tempered), hole diameter and edge distance against local codes.
- Confirm the substrate, such as concrete grade or steel plate thickness, to select the anchor type.
- Standard handrail tube is Ø50.8 mm. Other diameters can be customized.
3. Safety and load requirements
- Check the horizontal line load and guard height required in your country or region.
- Provide flag size and local wind pressure so the swing arm joint can be verified.
- Public venues, schools and stadiums should require project-level structural calculations.
4. Procurement data
Quantity, post height, span, finish and delivery date, so a precise quotation can be prepared.
Technical Specifications
| Item | Specification |
|---|---|
| Series | QB1 swing arm flagpole balustrade post |
| Models | QB1-B04APM / QB1-LT01M |
| Material | SUS304 / SUS316L (Duplex 2205 evaluated on request) |
| Finish | Satin (standard); mirror and PVD customizable |
| Handrail interface | Ø50.8 mm (per drawing) |
| Swing arm length | About 550 mm (per drawing, customizable) |
| Glass clamp spacing | About 600 mm (per drawing) |
| Lower clamp to base | About 230 mm (per drawing) |
| Glass thickness | Reference 10 mm, typical 8–12 mm, to be confirmed per project |
| Overall post height | To be confirmed per project |
| Base type | Flange base plate, surface mounted |
| Processes | CNC machining, precision welding, investment casting, polishing |
| Ultimate load | Available upon request |
| Salt spray test report | Available upon request |
| Material spectrometer report | Available upon request |
| MOQ / lead time | To be confirmed per project |
Engineering Excellence, Testing & CAD Downloads
How it works: the QB1 post combines the structural role of a balustrade with a display function. The base plate transfers load into the substrate, two clamps hold the glass, and the handrail ties the system into a continuous load path. The swing arm extends through a pivot joint, so wind load from a flag travels into the post body rather than acting directly on the glass.
Manufacturing and quality control
- Incoming material is checked by spectrometer to verify SUS304 or SUS316L grade.
- CNC machining and welding are followed by full inspection of critical dimensions.
- Grinding, polishing and satin finishing are followed by a surface uniformity check.
- Salt spray, load and fatigue testing are available upon request and confirmed per project.
- Each piece is packed with protective film and foam to prevent scratches.
Drawing support: DWG and PDF drawings are available so designers and contractors can review details and prepare shop drawings.
Video demonstration: watch installation and product demonstrations in the SSHW YouTube playlist. For matching products, browse the stainless steel post and baluster collection.
Global Applications & GEO Adaptability
- Coastal high-salt-spray resorts: SUS316L is recommended to limit chloride pitting. The swing arm carries hotel flags and event signage, and maintenance is mainly regular fresh-water rinsing.
- Tropical rainy commercial complexes: high humidity and frequent rain can cause surface contamination and tea staining. Specify 316L and a base detail that drains well.
- Middle East high-temperature facades and villas: strong UV, heat and dust place demands on finishes and gaskets. Use heat-resistant EPDM gaskets with a satin or PVD finish.
- European and North American hotels and residences: code compliance, documentation and visual consistency are priorities. The QB1 post can be supplied with project calculations and a custom finish.
For background on how stainless steel resists corrosion, see Wikipedia: Stainless steel.
Installation Overview & Maintenance Guide
Installation notes
- Before installation, check the base plate dimensions, anchor positions and surface flatness.
- Always use gaskets between glass and metal. Never allow direct contact.
- Clamp and anchor torque must follow the fastener manufacturer and project design. Avoid over-tightening, which can crack glass.
- Leave a suitable installation gap between glass and post to allow thermal movement.
- Waterproof the base area so water does not stay trapped.
- After the swing arm is installed, test its rotation and re-tighten the joint.
Routine maintenance
- Clean with a neutral detergent and a soft cloth every one to three months. Coastal projects should be washed monthly.
- Never use chlorine bleach or steel wool.
- To prevent tea staining, remove salt and dirt promptly, wipe along the grain direction and use a stainless steel cleaner when needed.
- Periodically check anchors, glass clamps and the swing arm joint for loosening.
Localized Buyer FAQs
Q1 (Perth, Australia): Should I choose 304 or 316L for a coastal villa in Perth?
Choose SUS316L. Salt spray and sea wind in Perth make SUS304 more prone to tea staining near the coast. Pair it with a satin or electropolished finish and rinse with fresh water regularly.
Q2 (Sharjah, UAE): Will the swing arm joint and gaskets fail in Sharjah's heat and dust?
The stainless steel body handles high temperatures well. The critical parts are the gaskets and pivot sleeves. We recommend heat- and UV-resistant EPDM or engineering plastic liners and a dust-resistant joint design. Temperature data is available upon request.
Q3 (Miami, USA): Can a flagpole balustrade post be used in Miami's hurricane zone?
It requires project-level structural calculations against local code and flag wind load. We can provide joint drawings to support the calculation, and we advise folding the arm back during high winds.
Q4 (Marseille, France): What are the MOQ and lead time for non-standard heights for a Marseille hotel?
Post height, arm length and clamp spacing can all be customized. MOQ and lead time are confirmed per project once we receive your drawings and quantity.
Q5 (Jeddah, Saudi Arabia): Can you supply handrails and glass clamps as a complete set for a Jeddah waterfront project?
Yes. We can supply the Ø50.8 mm handrail, connectors, glass clamps and fasteners together, with matched material and finish to avoid color differences and compatibility problems.
Request CAD Drawings and Factory Wholesale Pricing
If you are working on a hotel, exhibition hall, commercial complex or coastal resort, contact SSHW for DWG and PDF drawings and factory wholesale pricing for the QB1 swing arm flagpole balustrade post. Please send the project location, environment type, glass thickness, post height, quantity and finish requirements, and our engineers will return a selection recommendation and quotation promptly.














